BD-1 High Density Rear LED Board

$67.50

BD-1 High Density LED Board

Out of stock

SKU: BD1-HDLED01 Category:

Description

BD-1 High Density LED Board Fully assembled with 337 WS2812B-2020 RGB addressable 2mm LEDs.

For fit with Mr. Baddeley BD-1 3D printed files.

https://www.patreon.com/mrbaddeley

Included in package:

• 1 – HD LED board, tested.
• 1 – Controller PCB unpopulated.  Allows for mounting an Arduino Nano and makes connections to the LEDs so only power is required.

Required items to make this work:

• Arduino Nano or similar that can run a WS2812 NeoPixel Library e.g. FastLED.

• A good power supply that can supply 2+ Amps at 5V.  Must be clean 5V supply.  These LEDs DO NOT support 6V.

This is for the assembled board with no Nano Installed.

BD-1 HD board with controller board mounted.  *Note:  No Nano or headers are included with the board.

Note: Requires soldering of the headers for the nano.  Please contact us if unable to do that before purchasing.  The board comes with the header on the LED board installed, so an external controller may be used.

Please support the board using the pin headers or standoffs.  This will ensure the two boards do not contact causing shorts, or have stress on the headers.  An unsupported board may cause the header on the LED board to break the traces, resulting in a failure of the LED board.

Based on previous shipments:

US shipping time – 1-2 weeks

Canada Shipping 1-2 weeks

Europe Shipping – 4-8 weeks typical

Please contact us for other shipping options to Europe to reduce shipping time (added cost).

All costs in USD.

For Software and other files:  https://github.com/grnwaveworkshop/BD-1HD

Additional information

Weight 0.2 kg
Dimensions 15 × 20 × 2 cm